Honda XR650L 13T MAXIMUM SPLINE CONTACT DOUBLE LIFE FRONT SPROCKET

Description

One issue with the finial drive system of the Honda XR650L is the thin ( 8.5MM ) front sprocket quickly wearing the output shaft leading to break downs way out there or a very costly repair. Another is only one side of the teeth of the front sprocket can be used because the sprocket only fits on the counter-shaft one way.
A way to reduce the wear on the output shaft is to use the wider ( 13.6MM ) front sprocket from a XR650R. Swaps like this usually result in a compromise. In this case the compromise is the XR650R sprocket must be installed in reverse and this causes a difficult installations process and a mis -alignment of the chain. Some riders report that this mis-alignment is not a huge issue given replacing the chain and sprockets is easier than rebuilding the motor to replace the output shaft. But, the mis-alignment will increase the friction in the chain drive system thus wearing the chain and sprockets out more quickly. This is especially true for bikes used daily on highways for commuting. Most everybody agrees they prefer to have the reduced output shaft wear without the mis-alignment.
A way to double the sprockets life would be to have a sprocket that fits on the shaft either way so both sides of the teeth can be used. Bear in mind you can't wear one side of the teeth all the way through, then flip the sprocket, and expect double life.
You must reverse when a normal wear pattern develops.
Now you can have minimum output shaft wear, minimum chain drive wear with the FRITZCO DRIVELINE sprocket.
The design of our sprockets provide correct chain alignment, allows for full spline contact with the XR650L's output shaft, fit the counter shaft either way, and straight up no hassle installation with a special
retainer
that takes the place of the OEM two bolt retainer and fasteners and provides quick change sprocket swap.
Our sprockets are machined from alloy steel that in every way is comparable to OEM Honda and the best offered by other manufactures. The sprockets are then given a heat treatment that provides a compatible sprocket for the Honda output shaft and longest chain wear life possible.
This ad is for our new quick change " Hi-Torque " 13 tooth sprocket with retainer.  See our other items for the standard 15 tooth, 14 tooth, and 16 tooth " Highway Star" sprocket versions.
This is an all new sprocket. Designed for OFF ROAD USE with the thought in mind that you can ride to your fav. off road spot using the 16 tooth sprocket and larger than stock rear sprocket. Then quickly change to the 13 and enjoy the ripping torque provided by the huge amount of reduction the 13 tooth offers. The pitch diameter of the 13 tooth sprocket is too small to use the OEM bolt on retainer and a special very heavy duty spring clip retainer is included.
All shipped free to the lower 48 states. We ship internationally and recommend EBay international shipping option.
Our warranty extends to the fit of the sprocket to a stock, un-modified 1993 to 2019 Honda XR650L's with the two bolt retainer. We are sorry but since we have no control over the environment this sprocket is to be used in wear is not covered by warranty. However, our sprockets are manufactured using the same processes as other manufactures so the wear life of your sprocket will be the same or better than sprockets from other manufactures.
Texas residents pay sales tax.
International shipping? ........ no problem! Please use EBay international shipping ser
vice.
My feedback on this item:
"Just ran the new 13T sprocket for 75 miles in the rain, mud and gravel. Works like a charm! No issues and I'm very happy to have the lower gear ratio."
"
Wanted to let you know that the sprocket went on by hand with no issues on my 2016 XR650L. Had it on within 30 minutes of the mail carrier putting it in my mailbox. Thank you for bringing this product to market. The 650R sprocket fix is a band aid. You are supplying the solution to the problem. Thanks again."
"
super fast shipping, excellent product"
"Fast shipping. Item is perfect for my needs. Many thanks!"
"
Found through ADVrider, Fritzco is *the* sprocket for the XR650L"